Results 1 to 7 of 7
Thread: Snow Problems
Threaded View
-
06-12-2002, 11:59 PM #1
Snow Problems
relatively new installation research building that uses chiller that supplys chilled water to coils at 50*f with face and bypass steam system for heat. The problem Im experiencing is the plenum chamber seems to be to short and on heavy snow days the plenum accumulates lots of snow that saturates the filters and slings freezing water and trips the freeze stat any suggestions on how could remedy.
Similar Threads
-
Suction pressure problems on TS units at low ambient temps
By nova in forum TransportReplies: 10Last Post: 18-03-2006, 07:35 PM -
Problems LG don't want you to know about
By Andy W in forum Air ConditioningReplies: 11Last Post: 16-02-2006, 04:52 PM -
Oil return problems
By Peter_1 in forum IndustrialReplies: 37Last Post: 23-08-2004, 11:30 PM -
Snow
By Derek in forum Technical DiscussionsReplies: 2Last Post: 24-11-2002, 01:32 AM -
oil pressure problems on air dryer
By edge in forum Trouble ShootingReplies: 1Last Post: 16-07-2002, 02:10 PM