Results 1 to 7 of 7
-
16-05-2007, 08:18 AM #1
refrigerant oil for screw compressor
Hi
I have to change the oil for a Kobe screw compressor its refrigerant is R22 and the oil type is Freol PU32N wich is not available in our market .what type of oil from Carrier or bitzer can replace it without problems
Thank you in advance.
-
16-05-2007, 08:41 AM #2
Re: refrigerant oil for screw compressor
The number 32 looks like a 32cSt oil.
SUNISO 3 GS or RENISO KM 32 or Emkarate RL 32H or Zerol 32 should do the job.
-
16-05-2007, 09:52 PM #3
Re: refrigerant oil for screw compressor
Hello nabil you need ISO VISCOSITY GRADE 68 or above ester oil for screw compressors to run
-
17-05-2007, 02:15 PM #4
Re: refrigerant oil for screw compressor
You will do best to check the IOM for the unit and see what oil or alternate oils are approved by the vendor for use in the compressor. Most are using a semi-snythetic on R-22. For normal A/C duty, Iso 68 is the viscosity used for the screws. For lower or higher temps, they may require a different oil.
Ken
-
22-05-2007, 01:28 PM #5
Re: refrigerant oil for screw compressor
What's the te/tc?
-
23-05-2007, 02:45 PM #6
Re: refrigerant oil for screw compressor
te is evaporator temperature, I use ET
tc is condensing temperature, I use CT
Ken
-
30-05-2007, 08:49 PM #7
Re: refrigerant oil for screw compressor
hello i maintain theses compressors on the same gas and the oil we have been using for the last 10 years is called zerico and its made by either mobil or esso i have never had any problems yet
Similar Threads
-
CARE refigerants by BOC
By dogma in forum RefrigerantsReplies: 8Last Post: 23-03-2010, 01:39 PM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
Refrigerant Compressor is Sweating
By kaskiris in forum Trouble ShootingReplies: 10Last Post: 16-04-2007, 11:05 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 11:50 PM