Results 1 to 5 of 5
Thread: Requirments for Design Engineer
-
25-02-2007, 07:45 AM #1
Requirments for Design Engineer
Hai everybody,
I think everybody know well about me on this forum, I am searching some ideas on design and eating all of ur brains.
Now i get struck up on this,
What is the essential requirments for design engineer ????
(which topic should be needed like heat transfer)
I will be very thankful if somebody guide me on this road
Senthil
-
25-02-2007, 09:30 AM #2
Re: Requirments for Design Engineer
It depends what you are designing. Thermodynamics is a good start when designing an type of refrigeration equipment. Fluid dynamics is also important.
I have been woking at refrigeration for 16 years and the most important things I have learnt on the job. I needed to know something for a project I was working on so I went and learnt it
Kind Regards AndyIf you can't fix it leave it that no one else will:rolleyes:
-
25-02-2007, 09:55 AM #3
-
25-02-2007, 05:08 PM #4
Re: Requirments for Design Engineer
Senthil., it might be worth while contacting fan manufacturers and learning the principles of airflow and pressures.
Once you understand how a fan works and then understand the effects of duct sizing on resistance to airflow you should be at the start of your learning curve.
A website to make a small start at is here...
http://www.vent-axia.com/knowledge/default.aspLast edited by Brian_UK; 25-02-2007 at 05:10 PM. Reason: added link
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
26-02-2007, 07:15 AM #5