Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2011
    Location
    Australia
    Posts
    6
    Rep Power
    0

    Mypro CPIV Controller Setpoint Selection



    Hi,

    We have a customer who has an older Mypro CPIV controller on a compressor. The customer wishes to run the compressor as a swing machine where it can be changed to run as high or low stage.

    Does anybody know if a different set of settings can be selected via a digital input or would they have to change the settings manually on the keypad every time?

    Thanks



  2. #2
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,365
    Rep Power
    39

    Re: Mypro CPIV Controller Setpoint Selection

    MP231,
    Do you have a manual?
    Have you contacted Mycom in Sydney?

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    70
    Posts
    4,707
    Rep Power
    47

    Re: Mypro CPIV Controller Setpoint Selection

    MP231.
    I have sent the controller Manual to you via your listed email address. hopefully you will get it.
    As to how to set it up I cannot advice.
    Good Luck Grizzly
    Despite the High Cost of Living it still remains Popular!

  4. #4
    Join Date
    Jul 2011
    Location
    Australia
    Posts
    6
    Rep Power
    0

    Re: Mypro CPIV Controller Setpoint Selection

    Thanks Grizz I'll have a look

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •