Results 1 to 7 of 7
-
26-08-2006, 12:13 PM #1
Denco & Danfoss info\training material
A while ago I picked up some pdf files off the denco.co.uk website. There were at least two chapters on psychometrics and included links to short video clips that illustrated various concepts such as partial pressures. I believe they were written by a lecturer at a college in association with Denco.
The files are no longer available on the website. Has anyone kept copies of these in some dusty corner of the hard drive? Google has drawn a blank, only bringing up links from other sites to Denco that are now "dead".
The same has occured with an article on the Danfoss Asia website about blast-freezers. I have a partial copy in that the conversion to pdf from html managed to lose parts of the rh side of the page. When I went back to get the missing bits, the website had been hit by a "corporate makeover" This link I'm sure I found here, but comes up with an error message concerning redirection limits rather than "not found".
Steve
-
25-05-2011, 12:15 PM #2
Re: Denco & Danfoss info\training material
I will dig deep but the old web site was closed down when GEA purchased us.
Rob Woodworth
GEA Denco Technical Support
rob.woodworth@geagroup.com
-
25-05-2011, 12:26 PM #3
Re: Denco & Danfoss info\training material
.
I recall those psychrometic PDFs on the old Denco site. I believe that they were a tutorial of sorts, with interactive exercises, but it was several years ago that they were there.
It's a shame that they are no longer available as they were very good and clear to understand. More importantly they offered work-through exercises on mixed air conditions - I used to recommend them all the time.
I'm not sure if I have a copy saved on my old files... I'll have to look.
OOops - Hope they're not copyrighted!
.
-
03-06-2011, 11:09 AM #4
Re: Denco & Danfoss info\training material
Not good news so far, i have our old web team looking around local servers to see if it was kept.
We do have some Power point presentations which are a introduction to psychrometic charts and a understanding of them but i suppose that not what you are looking for really.Rob Woodworth
GEA Denco Technical Support
rob.woodworth@geagroup.com
-
03-06-2011, 04:45 PM #5
Re: Denco & Danfoss info\training material
Ohh that sounds exactly what he is looking for.. I would love to get a PM with those files
Refrigeration is not just cool, it is my life.
-
06-06-2011, 08:57 AM #6
Re: Denco & Danfoss info\training material
Bad news i am afraid, we have a copy but its protected by copyright.
Sorry guys.Rob Woodworth
GEA Denco Technical Support
rob.woodworth@geagroup.com
-
06-06-2011, 10:12 PM #7
Re: Denco & Danfoss info\training material
Just a quick search via google produced this!
http://www.engineeringtoolbox.com/ai...xing-d_26.html
Via this!
http://www.engineeringtoolbox.com/ps...t-si-d_28.html
I hope it is of some use, only your original route via Denco now seem closed!
Grizzly
Similar Threads
-
Oil cooling circuit on Danfoss compressors?
By The MG Pony in forum FundamentalsReplies: 15Last Post: 16-10-2010, 12:33 PM -
Danfoss Compressors
By iceman007 in forum FundamentalsReplies: 0Last Post: 28-07-2006, 06:32 PM