Results 1 to 7 of 7
Thread: Micro-cool controller
-
04-08-2006, 07:56 PM #1
Micro-cool controller
Hi
Tried to change the danfoss adap-kool AKC 114B.Wrote down all the info in F3 of handset and address.First controller was new,when I looked in F1 it stayed on stand-by and nothing operated.Tried a second controller which was a re-furb,this was pass word protected.All bit switches were changed to match up with old controller which had a blown transformer.
Q1.Why stand-by
Q2.How do I get passed the pass word
ManyThanks
Bernard
-
04-08-2006, 08:30 PM #2
Re: Micro-cool controller
Originally Posted by bernard
The password is in the gateway (never heard of a controller password in Danfoss)
What is you front end computer or touch screen.
If it's Danfoss it will be a PC that will need to be uploaded.
Let us know and we can talk you through it
Kind Regards AndyIf you can't fix it leave it that no one else will:rolleyes:
-
04-08-2006, 09:00 PM #3
Re: Micro-cool controller
Hi Andy
Its a Woodley touch screen front end,I changed one before but it was about two years ago.I can,t remember having much trouble.
The controller is a Danfoss Miro-Cool Akc114b Prt no 084b6033.
I have my doubts about refurbished controllers but the one thats new should work.I must have missed some vital info
Thanks for your help
Regards Bernard
P.S.I have the handheldLast edited by bernard; 04-08-2006 at 09:04 PM.
-
04-08-2006, 09:06 PM #4
Re: Micro-cool controller
Originally Posted by bernard
they all come in standby, you need to switch the main switch on in the thermostat or service sections in the controller 1 is on 0 is off and -1 is manual
don't forget to set the refrigerant type before switching on if the S1 (Evaporator probe) is a transducer not a probe.
Hope this helps.
Kind Regards AndyIf you can't fix it leave it that no one else will:rolleyes:
-
04-08-2006, 09:15 PM #5
Re: Micro-cool controller
Hi Mark
Ah that makes sense,will update you,the refurb controller asks for a password,I,ve asked several people and they say the same as you "they have never heard of it"
Many thanks for your help
Bernard
-
18-08-2006, 08:26 PM #6
Re: Micro-cool controller
The standard password in the hand terminal is 99
with + and - key produce the first 9 press digit and enter second 9
now you can enter whatever you want.
full doc on akc 114 can be found on:
HTTP://www.koeltechniek.nl.tt
choose documentatie,
klik red link
or follow this direct link:
http://tenderlove.homeip.net/domeinn...ds:akc,114~AND
good luck Victor
-
25-08-2006, 07:10 AM #7
Re: Micro-cool controller
Look if the regulating condition is 0 (no cooling) or 6 (forced closing)
In case it is 6, go to extended functions and watch after the ON-ImpMode. Set must be 0, if connections 32-33 not used.
Regards
Sergio
Similar Threads
-
Stiebel Remote Controller?
By Makeit go Right in forum Air ConditioningReplies: 7Last Post: 24-05-2006, 12:33 AM -
Help with new electronic refrigerator controller !
By EngiGal in forum New TechnologiesReplies: 17Last Post: 08-04-2006, 07:39 PM -
Controller wiring
By Mickvee in forum Air ConditioningReplies: 2Last Post: 30-12-2005, 03:04 AM -
Temperature controller which operates down to -100C/-150F
By DaBit in forum IndustrialReplies: 4Last Post: 27-10-2003, 11:43 AM -
Fan Controller
By Abe in forum Trouble ShootingReplies: 4Last Post: 12-01-2002, 03:21 AM