Results 1 to 11 of 11
Threaded View
-
11-02-2024, 03:14 AM #1
Frick TDS oil level switch retrofit
Hi all,
Regarding the older (90's) Frick TDS horizontal oil separator low oil level float switches that are installed at the 11 or 1 o'clock positions on the top of the oil separator with the float switch attached to the end of a rod protruding into the separator and oil towards the 5 or 7 o'clock position.
What low oil level switch retrofits are you all installing on these machines when the switch fails or leaks? Or are you re-installing the status quo?
Thanks for your help.