Results 1 to 2 of 2

Thread: Whirlpool K40

  1. #1
    Join Date
    Dec 2023
    Location
    United Kingdom
    Posts
    1
    Rep Power
    0

    Whirlpool K40



    New Here.
    Replaced the solonoid inlet but the ice machine still dumping more water than usual. Still making ice but flooding my cellar. It dumps after the ice slides on to the cutter grid. Any advice?
    Cheers
    MGW



  2. #2
    Join Date
    Feb 2011
    Location
    scotland
    Posts
    469
    Rep Power
    17

    Re: Whirlpool K40

    Sometimes when the temperature of the room the ice machine is in gets too cold, it can cause the harvest/ice release cycle to run too longer. Which I think is when the water inlet valve is opened.

    If the machine is making the ice to the right thickness you want. You can try blocking up half of the condensor coil with a bit of cardboard, to try and speed up the harvest/ice release cycle.
    Last edited by seanf; 20-12-2023 at 10:09 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •