Results 1 to 2 of 2
-
05-04-2023, 09:34 PM #1
Daikin I touch controller (1st generation)
Looking for some info please guys if you can help.
I have a Daikin 5MKS90E2V3B multi outdoor connected to an I touch centralised controller.
I’ve never seen this setup on on multi like this before and due to limited access at present I can’t see exactly how it’s been wired.
I have checked the install manual and can’t see any connections at the outdoor to allow an I touch to be wired.
Can any one expand on the wiring/setup of the above please?
-
06-04-2023, 10:15 AM #2
Re: Daikin I touch controller (1st generation)
It's connected to the bus, 2 wires
You can pick up the signal everywhere along the busIt's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.