Results 1 to 10 of 10
  1. #1
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Missing part needed to complete system



    Going off of the diagram I have attached (although that is for a car and this is for a cellar)
    I have an internal Evaporator with blower made by

    Beer Master
    Asset number 048024

    And I am going to need the external condenser with fan

    Any ideas on what to buy please and where?
    Attached Images Attached Images



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    74
    Posts
    11,194
    Rep Power
    58

    Re: Missing part needed to complete system

    You need the condenser coil to match the compressor, have you identified a compressorcyet?
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Re: Missing part needed to complete system

    Quote Originally Posted by Brian_UK View Post
    You need the condenser coil to match the compressor, have you identified a compressorcyet?
    So the pipe of the evaporator needs to be the same bore as the pipe from the condenser right?

    No I have not identified the compressor, should this not of been inside the evaporator box?

  4. #4
    Join Date
    Jul 2006
    Location
    USA
    Age
    72
    Posts
    843
    Rep Power
    24

    Re: Missing part needed to complete system

    You asked the same question last month.

  5. #5
    Join Date
    Apr 2008
    Location
    Southampton, England
    Age
    48
    Posts
    1,018
    Rep Power
    34

    Re: Missing part needed to complete system

    That asset number is just from the maintenance company.

    You need the model number to match the outdoor - something like CMI407-69. Not sure where it is from memory - around the side where the pipes go in? Once you have that if it is still to be found check with Climate Center (Wolseley) as it's one of their brands.
    Beermaster are one of the expensive ones so if the indoor is in poor condition consider a Marstair or J&E Hall unit instead.

    Cheers,
    Andy.
    Health and safety first..........unless I'm in a hurry.

  6. #6
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Re: Missing part needed to complete system

    Quote Originally Posted by Tayters View Post
    That asset number is just from the maintenance company.

    You need the model number to match the outdoor - something like CMI407-69. Not sure where it is from memory - around the side where the pipes go in? Once you have that if it is still to be found check with Climate Center (Wolseley) as it's one of their brands.
    Beermaster are one of the expensive ones so if the indoor is in poor condition consider a Marstair or J&E Hall unit instead.

    Cheers,
    Andy.
    Wont be able to have a look at it for a while as its in storage
    So you are saying that Worlely the plumbers merchants sell them? and I would be better off with a Climate Center or a Marstair or J&E Hall instead of beer master right?

  7. #7
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Re: Missing part needed to complete system

    To confirm right that everything is self contained in the inside unit the evaporator, the expansion vale and the drainer?
    And all I need is the outdoor condensor and someone to install and gas it all to work?

  8. #8
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Re: Missing part needed to complete system

    Question: Anyone hear any experance with plumbing out beer cellar systems for pubs/ bars?
    I was in town the other day and they had the Christmas market on. There was a mobile bar set out in an old van with beer kegs laid all over the floor. No cellar cooling system to pre chill the beer to 12C before it enters the beer chiller
    Will them give them a lot of beer waste in terms of fobbing/ froff?

  9. #9
    Join Date
    Dec 2006
    Location
    UK
    Posts
    109
    Rep Power
    18

    Re: Missing part needed to complete system

    Quote Originally Posted by Tinkler View Post
    Question: Anyone hear any experance with plumbing out beer cellar systems for pubs/ bars?
    I was in town the other day and they had the Christmas market on. There was a mobile bar set out in an old van with beer kegs laid all over the floor. No cellar cooling system to pre chill the beer to 12C before it enters the beer chiller
    Will them give them a lot of beer waste in terms of fobbing/ froff?
    Cask Ale requires to be stored at 11c. In this weather, you can easily get away with just standing them outside with no cooling, so guess this is what you have seen

    Beermaster is expensive stuff - you'll be paying a lot to get a matched beermaster condenser. An alternative approach would be to get a (far cheaper) Marstair CKA unit which can easily be hacked to work with what you have. It will do the job nicely in the right sized room

    You need an engineer of course. I suggest you drop me a PM - I may be able to help.
    Last edited by Rtic; 23-11-2022 at 10:01 PM.

  10. #10
    Join Date
    Nov 2022
    Location
    UK
    Posts
    6
    Rep Power
    0

    Re: Missing part needed to complete system

    Quote Originally Posted by Rtic View Post
    Cask Ale requires to be stored at 11c. In this weather, you can easily get away with just standing them outside with no cooling, so guess this is what you have seen

    Beermaster is expensive stuff - you'll be paying a lot to get a matched beermaster condenser. An alternative approach would be to get a (far cheaper) Marstair CKA unit which can easily be hacked to work with what you have. It will do the job nicely in the right sized room

    You need an engineer of course. I suggest you drop me a PM - I may be able to help.
    Hi Rtic
    There dose not appear to be an option for me hear to send a PM so.....

    Do you know how much a new Marstair CKA outdoor unit will cost and couuld I pick a used one up on ebay?

    Do you know any engineers in the Manchester area?
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •