Results 1 to 5 of 5
Thread: Bearing Frick XJF 151
-
27-05-2022, 01:23 PM #1
Bearing Frick XJF 151
which bearings are used in the XJF 151, not Johnson Controls codes but SKF or FAG models with bearing clearances. I didn't find if they C2,C3,C2L.
-
27-05-2022, 02:06 PM #2
Re: Bearing Frick XJF 151
Diego,
first and foremost, find a reliable bearing supplier. Only then ask about the species. You have the wrong supplier and you have a problem with the compressor.
Josef.
-
27-05-2022, 07:23 PM #3
Re: Bearing Frick XJF 151
Our distributor is reliable SKF, however I need more specific data for the correct purchase of these bearings
-
27-05-2022, 08:10 PM #4
Re: Bearing Frick XJF 151
Diego you can only be 100% sure if you by bearings from JCI.
Last year I made overhaul on Sab163 and get from JCI bearings that you can read for example Qj311N2MPAT42 FAG. With this you can go to FAG supplier and by original bearings.
If you by for FRICK also from JCI you get SKF YORK534B????????? part no.from JCI.
I am not sure that SKF supplier will recognize what is bearing from they production with this YORK part no.
-
27-05-2022, 08:19 PM #5
Re: Bearing Frick XJF 151
Diego,
I saw pictures of your compressor, I don't believe the bearings are original SKF.
I don't care what bearings you use, but if such a supplier is reliable for you, it's a shame for you, the compressor will crash again.
Josef.