Results 1 to 6 of 6
Thread: Titanium BPHE
-
23-06-2006, 01:56 PM #1
Titanium BPHE
I contacted Alfa Laval for having an offer for titanium plates exchanger.
They told me that their delivery time for that is now 24 months (2 years).
This is of course ridiculous. Anybody in other parts of Europe is having the same problems with supplies of titanium PHE?
-
24-06-2006, 09:07 PM #2
Re: Titanium BPHE
No answer from me, Nick. I am wondering why you require titanium?
-
25-06-2006, 04:26 PM #3
Re: Titanium BPHE
no nick
the time is crazy but probably close to correct. when I was sales manager last year with Isotherm in USA we had the same difficulty with our titanium plate and frame
We could get titanium tube for excahngers but not the plate.
the problem is the ability to aquire titanium sheet material to make the plates apparently demand espically from asia esically china is taking all of the available production. it is a real bad problem for the industry.
hope this helps, sometimes you can find used units ..
-
26-06-2006, 07:16 AM #4
Re: Titanium BPHE
Thanks all. Titanium is required for a sea water application.
-
17-05-2008, 01:11 PM #5
Re: Titanium BPHE
I also had problem with titanium PHE, but I found thermowave, this firm is will make titanium PHE in 12-14 week, this is really good for me.
-
10-06-2008, 04:51 AM #6
Re: Titanium BPHE
Greeting from Peru, what is the capacity requested? we have a small plate heat exchanger in our stock
Similar Threads
-
Titanium Flat Plate Heat Exchangers
By TBFTL in forum Technical SpeculationsReplies: 8Last Post: 10-09-2006, 10:47 AM -
titanium and copper/brass/or stainless steel brazing?
By vinay in forum Trouble ShootingReplies: 4Last Post: 08-08-2002, 06:14 PM