Results 1 to 10 of 10
  1. #1
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Sabroe SMC 108LL MK4



    Anyone can offer advice on servicing this compressor.
    Has external oil filter, which is replaced if differential pressure high etc.
    In compressor sump is oil pump strainer 100um, is it cleanable, or throw away?
    Manual suggesting with LL (long life) 10-15000 hours before overhaul on ammonia duty.
    Any experiences?
    This is on small new system direct drive, VSD

    Thanks



  2. #2
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    I made a lot of this. Every one with VSD.
    Do not wait high diff. pressure on oil filter.
    Change once a year , if need often.
    I usually change oil filter inside comp. on service "C".
    If comp. running in "NORMAL" condition -10,+35 or booster I made annual service once a year.
    Other service made every 10000 hours because its over 1500 rpm.
    This way "A","A","A","C".
    If you have HEATPUMP unit also every 10000 hours.
    But "A","B","A","C".

    I hope this help
    If you need some doc. please inform me.

    best regards
    AKI

  3. #3
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Sabroe SMC 108LL MK4

    Thanks AKI,
    Can you clarify when valve plates should be changed on LL if running 1460rpm
    Last edited by RANGER1; 09-01-2021 at 08:43 AM.

  4. #4
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    I forget also change coalescer filter every 10000 hours , to reduce oil loose.

  5. #5
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Sabroe SMC 108LL MK4

    Quote Originally Posted by AKI View Post
    I made a lot of this. Every one with VSD.
    Do not wait high diff. pressure on oil filter.
    Change once a year , if need often.
    I usually change oil filter inside comp. on service "C".
    If comp. running in "NORMAL" condition -10,+35 or booster I made annual service once a year.
    Other service made every 10000 hours because its over 1500 rpm.
    This way "A","A","A","C".
    If you have HEATPUMP unit also every 10000 hours.
    But "A","B","A","C".

    I hope this help
    If you need some doc. please inform me.

    best regards
    AKI
    AKI,
    Could you pass email on any documents on what ABC etc is.
    Any information on when to change valve plates , piston rings etc.

    Thanks
    Last edited by RANGER1; 09-01-2021 at 09:51 AM.

  6. #6
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    RANGER1 in all of this sets A,B,C, always change ring plates.
    I send you doc. and part no. this sets.

  7. #7
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    Also if you have VSD(like you sad" comp. running between 1500 and 1700 rpm, not 1460.

    regards
    AKI

  8. #8
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    RANGER1 check email

  9. #9
    Join Date
    Oct 2016
    Location
    Serbia
    Age
    51
    Posts
    110
    Rep Power
    8

    Re: Sabroe SMC 108LL MK4

    If you need part no. for this sets I will send you but not before monday.

  10. #10
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Sabroe SMC 108LL MK4

    Quote Originally Posted by AKI View Post
    If you need part no. for this sets I will send you but not before monday.
    AKI,
    Have part number thanks for help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •