Results 1 to 4 of 4
-
09-11-2020, 09:41 AM #1
York chiller heating will not start
Hello
I have a York YVAG012RSE30 new.
There is water on the system, de air is out the system.
When i plug it in, 230V, i get EE on the display.
A timer on the print count 160 seconds, after that nothing happens.
EE stays.
Somebody familiar with this?
Greetings Fernando.
-
09-11-2020, 01:25 PM #2
Re: York chiller heating will not start
EE error code is for a water level fault.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
09-11-2020, 04:33 PM #3
Re: York chiller heating will not start
I just have found the problem.
There are dip switch inside the remote. 4-5-6 has to be ON.
Nothing is written on the manuel. The manual from York is incomplete.
-
27-11-2020, 07:38 AM #4
Re: York chiller heating will not start
Problem was the dip switch from the remote controlle.
Some has to be in the ON position, depends from what sort of installation.