Results 1 to 2 of 2
  1. 22-11-2019, 05:38 PM #1
    ballvalve's Avatar
    ballvalve
    ballvalve is offline regular poster
    Join Date
    May 2008
    Location
    dublin
    Posts
    80
    Rep Power
    16

    Daikin EkEQFCBAV



    I have a daikin AHU with a EkEQFCBAV running off a vrf if.
    Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning

    Mode setting 23 is set for x control.

    Any help.
    Thanks


  2. 23-11-2019, 12:01 PM #2
    TrickyRikki's Avatar
    TrickyRikki
    TrickyRikki is offline regular poster
    Join Date
    Feb 2017
    Location
    UK
    Posts
    112
    Rep Power
    9

    Re: Daikin EkEQFCBAV

    Quote Originally Posted by ballvalve View Post
    I have a daikin AHU with a EkEQFCBAV running off a vrf if.
    Everything is operational but I now need the ahu to take control on a 0 to 10v . I can not remember the field setting code for the ahu to now take control so I can disconnect the remote after commissioning

    Mode setting 23 is set for x control.

    Any help.
    Thanks
    Not sure if it will help you but there is settings ect in the installation manual

    https://my.daikin.eu/dam/document-li...ls_English.pdf
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules