Results 1 to 4 of 4

Threaded View

  1. 29-09-2019, 08:36 AM #1
    RANGER1's Avatar
    RANGER1
    RANGER1 is offline VIP Poster
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Phillips 275AF oil level float

    Looking for tips or advice on Phillips oil level float
    Have oil reservoir with pressure regulator set 100 kpa (15psi)higher than single compressor sump pressure.
    Reservoir 2 metres (6 feet)above sump with solenoid before float on compressor.
    Previously worked for 10 years, started to get high sump levels, replace, same problem.
    Pressure test needle & seat with air 30psi & leaks from new.
    Would send back, but USA to far for that.
    Any ideas?
    Thanks
    Last edited by RANGER1; 29-09-2019 at 08:48 AM.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules