Results 1 to 6 of 6
Thread: sandwich panels production line
-
05-06-2006, 11:12 AM #1
sandwich panels production line
helooo
i need some help
we are planning for extending our business ,we search for available production lines " new or used " for sandwich insulation panels injection type un continuous line preferred with vacuum .
i need the suppliers contact data.
aymn
-
05-06-2006, 12:10 PM #2
Re: sandwich panels production line
hi
here is two companies for isolated panals production, may be they help you
www.frimatec-isocab.com
www.misaspa.it
good luck
afeef
-
05-06-2006, 09:08 PM #3
Re: sandwich panels production line
Hey, Isocab is a Belgium company, based +/- 50 km 's from here.
They did first businees in flax till 1960 -1970 and started then with the fabricating of modular panels.
They're owned since several years by the Thyssen Group.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
12-06-2006, 12:37 PM #4
Re: sandwich panels production line
thank you for your help
if you know the site of MANNI they are afamous press manufacturing in italy .i think it will help .
-
12-06-2006, 10:39 PM #5
Re: sandwich panels production line
here is two companies from turkiye for isolated sandwich panels for cold room, freezing room, shock room production, may be they help you
www.izoteknik.com
www.izopoli.com
-
13-06-2006, 10:41 AM #6
Re: sandwich panels production line
Originally Posted by erkanyildirim
ON.
Similar Threads
-
Suction gas <-> liquid line heat exchange and performance gains
By DaBit in forum Technical SpeculationsReplies: 30Last Post: 18-05-2010, 01:52 PM -
Mismatch of line sizes
By Abe in forum CommercialReplies: 15Last Post: 03-03-2003, 09:29 PM -
Minimal required R134a speed in suction line
By DaBit in forum CPU OverclockersReplies: 32Last Post: 08-05-2002, 05:19 AM -
Line Sizing and Piping Practice
By subzero*psia in forum CommercialReplies: 1Last Post: 22-06-2001, 03:47 AM