Results 1 to 27 of 27
Thread: HVAC piping design software
-
27-04-2006, 02:13 PM #1
HVAC piping design software
Anyone any experience with a piping design software?
Would anybody suggest any good software package?
-
27-04-2006, 08:21 PM #2
Re: HVAC piping design software
Is it for refrigerant copper pipes or water pipes?
Danven from Danfoss,
Coolpack
I used in the past an old package from Danfoss where you could add bends, sighth glasses, upgoing lines, double risers but since windoiws 98, it isn't working any longer....
Further you have the software from Carrier and Trane, Dupont de Nemours has a very nice (read expensive) one,....It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
27-04-2006, 09:51 PM #3
Re: HVAC piping design software
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
28-04-2006, 08:00 AM #4
Re: HVAC piping design software
Originally Posted by Peter_1
the latest software from Danfoss (DIRCALC_1.14) allows you to calculate refrigerant pipes for more the 20 refrigerants (including CO2), and to add filter driers, solenoids and other valves, ... and it's for free (downloadable from every Danfoss site)...
Bruno
-
28-04-2006, 10:52 AM #5
Re: HVAC piping design software
Thanks, I'll give it a try. I was searching something to give a service to my customers who install split system with remote condensers.
-
28-04-2006, 11:09 AM #6
Re: HVAC piping design software
I can't seem to find the access to the download section of Danfoss website (as all corporate websites are a mess).
And the registration form ends in a SERVER ERROR message.
-
29-04-2006, 08:07 AM #7
Re: HVAC piping design software
No Nick how do you produce chiller when you need soft for that?Or how do you produce chiller when you dont have it yet?
Renato
-
29-04-2006, 11:50 AM #8
Re: HVAC piping design software
Hello NoNickName
Originally Posted by NoNickName
http://www.danfoss.com/Asean/Busines...ls/DIRcalc.htm
http://www.thermokey.it/
http://www.flatplate.com/index.htm
Hope to find something you need
Come back with comments
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
29-04-2006, 12:53 PM #9
Re: HVAC piping design software
Originally Posted by Renato RR
Of course we are already calculating the required pipe size on our products, but that has nothing to do with a HVAC DX plant
-
30-04-2006, 08:23 AM #10
Re: HVAC piping design software
Bruno,
Ik vind enkel 1.13 versie, waar staat de 1.14 versie?
Gevonden http://www.danfoss.com/Holland/Busin...ls/DIRcalc.htm
=Dircalc link on the bottom an exe and a zip file, it is multilanguage but the page is in Dutch
NoNickName, Why not provide them this free software?Last edited by Peter_1; 30-04-2006 at 08:29 AM.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
30-04-2006, 11:23 AM #11
Re: HVAC piping design software
Originally Posted by Peter_1
-
30-04-2006, 11:55 AM #12
Re: HVAC piping design software
Originally Posted by Peter_1Originally Posted by Peter_1Originally Posted by NoNickName
I do not understand this (maybe no need ) this is DIRCalc and not a calculator
In my opinion problems start here, everyone is a HVACR designer (the best one ) but later on coming back with basic questions asking for help.
NHF, please
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
30-04-2006, 02:02 PM #13
Re: HVAC piping design software
I never told anyone I'm the best engineer of the world. And never heard any croatian engineer is the best of the world.
Dircalc is dircalc and not a calculator. Ok, so what?
Let's come back on topic: I need to provide a service to our customers, and I cannot do it on paper, I need to do it in some automatic way, with a technical eye-catching presentation.
Josip, if you would like to help me, thank you very much. If you don't, see you next time.
-
30-04-2006, 02:38 PM #14
Re: HVAC piping design software
Hello NoNickName
I never told anyone I'm the best engineer of the world. And never heard any croatian engineer is the best of the world.
Dircalc is dircalc and not a calculator. Ok, so what?
Let's come back on topic: I need to provide a service to our customers, and I cannot do it on paper, I need to do it in some automatic way, with a technical eye-catching presentation.
Josip, if you would like to help me, thank you very much. If you don't, see you next tim
Either, you or me did not catch the point
Originally Posted by Peter_1
I would like to see other comments about, it is possible that I am not right....
Please, tell us why I put so many links to:
http://www.refrigeration-engineer.co...ks.php?catid=5
if I do not like to help:
Best regards,
JosipLast edited by Josip; 30-04-2006 at 02:50 PM. Reason: to add some text
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
30-04-2006, 07:14 PM #15
Re: HVAC piping design software
Ok, Josip, we made our point clear. Sorry for being rude.
-
30-04-2006, 09:09 PM #16
Re: HVAC piping design software
Originally Posted by NoNickName
English is not our natural language and mistakes are possible (sh't happens )
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
30-04-2006, 11:53 PM #17
Re: HVAC piping design software
sh't happens
-
01-05-2006, 10:13 AM #18
Re: HVAC piping design software
What about Hevacomp? Anyone uses it? Is it good?
Some time ago I tried to find it in "peer to peer" programs (just for taining purpose ) and couldn't find it.Last edited by klimek; 01-05-2006 at 10:16 AM.
-
03-05-2006, 12:11 PM #19
Re: HVAC piping design software
Originally Posted by Peter_1
De versie die overal zou moeten beschikbaar zijn is de 1.14. Als ik jouw link volg, krijg ik ook de 1.14 .
Here is the link with details in italian:
http://www.danfoss.com/Italy/Busines...ls/DIRcalc.htm
-
03-05-2006, 01:29 PM #20
Re: HVAC piping design software
Originally Posted by NoNickName
Thanks
-
03-05-2006, 01:31 PM #21
Re: HVAC piping design software
hello
I am manufacturer of wire wound finned tubes
-
03-05-2006, 01:31 PM #22
Re: HVAC piping design software
hello
I am manufacturer of wire wound finned tubes
-
03-05-2006, 02:34 PM #23
Re: HVAC piping design software
Thanks everybody for your feedback.
-
03-05-2006, 07:14 PM #24
Re: HVAC piping design software
Raghunandan,
Can you provide us your company website please?
It can't be found on your private profile.
I'm happy what you do in your country with the extra incomes you gain from your company.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
04-05-2006, 06:40 AM #25
Re: HVAC piping design software
Morsy2021 provided me a very good, for me new service
google.mail.com
don't type www before it
Have once a lookIt's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
17-06-2006, 02:24 PM #26
Re: HVAC piping design software
-
06-02-2010, 06:29 AM #27
Re: HVAC piping design software
Hi every body
I wanna start to learn HVAC designing, which book is excellent for me? any body have that e-book? Could you please send me to "janbiglar@gmail.com"?
Thanks
Similar Threads
-
HVAC design
By reggie in forum Refrigeration BooksReplies: 140Last Post: 26-11-2010, 04:46 AM -
HVACR design software
By Lc_shi in forum Air ConditioningReplies: 0Last Post: 02-03-2006, 08:28 AM -
Free Software, Bèta vers.: Designbuilder
By Peter_1 in forum Tools and CalculatorsReplies: 2Last Post: 05-01-2006, 12:01 AM