Results 1 to 10 of 10
Thread: Overhaul compressors
-
25-04-2006, 09:04 PM #1
Overhaul compressors
Can the members give me some addresses from companies who delivers overhauled compressor (we have 2 machines broken and client asks to replace them with 2nd hand.
I have for the moment only Gradius in France
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
25-04-2006, 09:40 PM #2
Re: Overhaul compressors
Hi Peter,
there is a company called London Hermetics based in England but unfortunately don't have address.
You may look them up on internet. Good luck in your search,
Jase
-
25-04-2006, 09:53 PM #3
Re: Overhaul compressors
Hi Peter
Have a look here http://www.jehall.co.uk/products/areas.jsp?paid=12
-
25-04-2006, 10:17 PM #4
Re: Overhaul compressors
Peter
I would recommend JE Halls,followed byhttp://www.acescomp.co.uk/distribution3.htm
JE Hall do the complete range, ACE's the normal commercial rebuilds.
Kind Regards Andy
-
25-04-2006, 10:39 PM #5
Re: Overhaul compressors
Thanks so far. Any others?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
25-04-2006, 11:12 PM #6
Re: Overhaul compressors
Perhaps could be
www.nationalcompressor.com
-
26-04-2006, 04:53 PM #7
Re: Overhaul compressors
HI Peter,
Try this Co.there big here in uk.
ThermaCom
www.thermacom.com
Tel.0118 950 0606
Fax.0118 950 0039
Cheers,
Raven
-
26-04-2006, 05:01 PM #8
Re: Overhaul compressors
Hi Peter 1
We have used a Duch company for overhauld compressors. Their internet address is http://www.sesint.nl/.
-
26-04-2006, 06:56 PM #9
Re: Overhaul compressors
Hello Peter_1,
why not ask manufacturer for equal compressors but second hand...
Maybe that is not possible for small compressors, it is usual for big open compressors..just idea
What about to repair old compressors? Sometimes quite expensive, but at bottom line you know what you did
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
26-04-2006, 08:52 PM #10
Re: Overhaul compressors
Thanks guys.
Josip, they only can be bought via overhaul but it was not that much cheaper.
We did it in the past but problem is then ...warranty if something goes wrong.
And if the crankshaft is bended or pistons broke in 100 pieces in the sump, then it has damaged also other parts.
So I don't touch these anymore.
Problem is at this client -poultry slaughter +/-55.000 pieces/day - has installed an NH3/glycol system and as soon an old '*****' compressors brakes, they don't repair it anymore but they install a cooiling coil on glycol.
Problem seems now that the already placed coils are undersized and with the first warm weather, they can't hold any longer the temperature in the cold rooms.
They urgently need now back the shut-down *****coolers (some already moret hen a year) but it may cost no money.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
Old Ammonia Compressors
By US Iceman in forum Old Refrigeration PhotosReplies: 7Last Post: 26-10-2009, 02:25 PM -
Manuerop Compressors
By john doersom in forum CommercialReplies: 39Last Post: 22-07-2006, 01:30 PM -
advice needed on overhaul hours
By stewartreith in forum Industrial CompressorsReplies: 1Last Post: 15-05-2006, 08:59 PM -
Compressor's volume efficiency
By John McGru in forum FundamentalsReplies: 0Last Post: 16-02-2004, 08:44 AM