Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2005
    Location
    USA
    Posts
    222
    Rep Power
    20

    How much run time should a compressor have?



    Is there a prefered percentage of run time for a condensing unit in a 24 hour period?

    Ken



  2. #2
    Join Date
    Aug 2005
    Location
    USA
    Posts
    5,302
    Rep Power
    25

    Re: How much run time should a compressor have?

    The first question is related to method of defrost. If the system is medium temperature, then air defrost is probably used.

    An air defrost cycle is longer than a positive defrost cycle such as electric or hot gas.

    The total amount of time for the defrost periods is deducted from 24 hours. At design operating conditions, the balance of the 24 hours remaining (after deducting the defrost time) is what the capacity was probably based on.

  3. #3
    Join Date
    Nov 2005
    Location
    australia
    Posts
    152
    Rep Power
    19

    Re: How much run time should a compressor have?

    Depends on the system

    minimum interval between two compressor starts
    5 minutes

    minimum compressor off time
    2 minutes

    minimum compressor on time
    2 minutes
    The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.

  4. #4
    Join Date
    Feb 2006
    Location
    derbyshire
    Posts
    610
    Rep Power
    19

    Re: How much run time should a compressor have?

    hi matey, lot of qoutes for equipement i get are based on 18 hr running time,hope this helps,cheers.

  5. #5
    Join Date
    Aug 2005
    Location
    iraq
    Age
    67
    Posts
    130
    Rep Power
    19

    Re: How much run time should a compressor have?

    Quote Originally Posted by kengineering
    Is there a prefered percentage of run time for a condensing unit in a 24 hour period?

    Ken
    hi sir
    yes there is , it depends upon the outside temprature , as it varies up and down , the percentage of running also varies
    the avarage of running is between 12 and 18 hour withen the 24 hour of the day
    best wishes
    afeef

  6. #6
    Join Date
    Jun 2001
    Location
    N.Ireland
    Age
    50
    Posts
    1,630
    Rep Power
    24

    Re: How much run time should a compressor have?

    Quote Originally Posted by afeef
    hi sir
    yes there is , it depends upon the outside temprature , as it varies up and down , the percentage of running also varies
    the avarage of running is between 12 and 18 hour withen the 24 hour of the day
    best wishes
    afeef
    In the UK 18 hours would be the standard, but be careful of over sizing, if the unit is a bit on the large size, try selecting on a 20 hour run time, or where humidity is a problem use 22 hour run time.

    Kind Regards. Andy

Similar Threads

  1. Pull-down time for residential unit
    By TooLittleTimeZZ in forum Domestic
    Replies: 25
    Last Post: 18-03-2006, 01:27 PM
  2. Time delay for multi compressors
    By iceman007 in forum Air Conditioning
    Replies: 5
    Last Post: 06-11-2004, 08:05 AM
  3. The time has come to leave home !
    By eggs in forum Legal-Business-Marketing
    Replies: 1
    Last Post: 23-10-2004, 07:03 PM
  4. time lock in dunham-bush chiller?
    By lin in forum Air Conditioning
    Replies: 5
    Last Post: 23-09-2003, 09:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •