Results 1 to 7 of 7
Thread: evap coils
-
25-02-2006, 10:17 AM #1
evap coils
Hi ; Does anyone know of a supplier for finned evap coils, have to quote for replacing coils on a largish built in custom built salad server (bed type) no manufactures make ! cheers
-
25-02-2006, 10:52 AM #2
Re: evap coils
Beehive coils make all mine, any shape and size, I also have had them made for cabinets with no data plates etc, just send the old coil as a patten or make a sketch and fax it off, I usually deal with Mark Bartram 01638 664134.
-
25-02-2006, 07:34 PM #3
Re: evap coils
Originally Posted by Andy W
-
26-02-2006, 07:10 AM #4
Re: evap coils
Originally Posted by stevo
you can check these sites , i hope you can find what you are looking for
www.fincoil.fi
www.aia.se
truly
afeef
-
26-02-2006, 03:04 PM #5
Re: evap coils
I've used a firm called Coil Maintenance before now for a one off special. They were reasonably priced and decent to deal with.
Tel.: 023 9252 4999
Website : www.coilmaintenance.com
-
26-02-2006, 05:18 PM #6
Re: evap coils
I use Heating & Cooling Coils quite a lot 02392 501431
Heres a link to their details http://www.edie.net/acrmarketplace/details.asp?cid=736
I'm not sure if they have their own web site.
-
27-02-2006, 05:31 PM #7
Re: evap coils
Thanks again chaps !
Similar Threads
-
Custom made coils
By Peter_1 in forum CommercialReplies: 25Last Post: 08-11-2005, 04:01 PM -
Evap motor no come on
By Apprentice in forum Technical DiscussionsReplies: 13Last Post: 04-12-2003, 04:07 PM -
evap pan freezing
By mark houser in forum CommercialReplies: 11Last Post: 19-12-2002, 12:00 PM -
Condensing Units- Evaporator Coils
By Abe in forum Chit Chat & Service StoriesReplies: 1Last Post: 02-01-2002, 09:06 PM -
calculation of evap..and condenser
By aliugur in forum FundamentalsReplies: 0Last Post: 07-11-2001, 02:17 PM