Results 1 to 12 of 12
Thread: ice rink design
-
11-02-2006, 03:04 PM #1
ice rink design
looking for data on ice rinks from floor design to equiptment selection can any one help
-
11-02-2006, 03:43 PM #2
Re: ice rink design
Hello, hope this will help a little
http://www.icerinkfloors.com/manuals/index.shtml
http://www.mycomj.co.jp/eproduct/nagano1.html
http://www.accent-refrigeration.com/index.html
http://www.brewer-garrett.com/winterhurst.htm
You have some t&t at accent page
Josip
-
11-02-2006, 08:26 PM #3
Re: ice rink design
thanks dude
-
06-03-2006, 09:17 AM #4
Re: ice rink design
Try cimcorefrigeration.com.
Or drop me a line
-
07-03-2006, 08:49 PM #5
Re: ice rink design
Charlie N,
Are you working for Cimco?
I visted their website the last week many times.
If so, mail me once in A PM please.
Kind regards
PeterIt's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
08-11-2007, 03:12 PM #6
Re: ice rink design
Gentlemen, went to the web sites which Josip gave... they were all sale pitches about their equipment!
Does anyone offer MEP design services for Ice Rinks?
-
12-11-2007, 09:48 PM #7
Re: ice rink design
IF you have ASHRAE refrigeration book, there is separate chapter for ice rinks.
-
13-11-2007, 04:01 AM #8
Re: ice rink design
Thanks, but I need 21st Century Technology.
-
13-11-2007, 10:29 AM #9
Re: ice rink design
Hi Orbie Hall,
What company are you working here in the Philippines? e-mail me I might help you.
Regards,
-
14-11-2007, 01:42 AM #10
Re: ice rink design
I'm in ARANMERREYO Company - CDO, Philippines... I will appreciate if you could help me.
-
14-11-2007, 09:59 AM #11
Re: ice rink design
I would like to understand the Trouble Shooting of the Refrigrirated Chillers and the General Problems
-
15-11-2007, 08:36 AM #12
Re: ice rink design
Hi Orbie Hall,
Ok, just clik my avatar and send me private message regarding your problem.
Regards
Similar Threads
-
capillary tube design
By Chris Zahrt in forum FundamentalsReplies: 5Last Post: 04-06-2009, 09:16 PM -
method to design air cooled condenser
By abbasi in forum New TechnologiesReplies: 4Last Post: 12-02-2008, 08:34 AM -
R507 in an R134a compressor: system design
By DaBit in forum Technical SpeculationsReplies: 17Last Post: 01-05-2003, 09:25 AM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM