Danfoss

[crashbang]

Can anyone tell me where I can find any manuals for a EKC 30 and EKC 31. Can't find it on the Danfoss web.

Cheers

[aawood1]

Hi I have a old white collection of instructions book that has the EKC 30 & EKC 31 listed in it but it is listed as out of production on the 1st. page for the capacity regulator. So do you know anyone who has a copy this book let me know and if not I will try to e-mail you the page with the info on. I think that I have two copys of this old book and could post one onto you if I can find the other one.

[aawood1]

Hi Have just checked some Danfoss CD's that I have got from them and found that the EKC 30 and EKC 31 are listed on the Collection of instructions disc that I got back in 2002 from there web site. ( I did have to make a phone call as well to a friend that works there too) I have found the disc a lot of help in the past as some of the Ammonia plant that I work on is 45 years old and can not get manuals for some of the valves anymore.

[crashbang]

Hi Have just checked some Danfoss CD's that I have got from them and found that the EKC 30 and EKC 31 are listed on the Collection of instructions disc that I got back in 2002 from there web site. ( I did have to make a phone call as well to a friend that works there too) I have found the disc a lot of help in the past as some of the Ammonia plant that I work on is 45 years old and can not get manuals for some of the valves anymore.

Any chance of a copy???

[aawood1]

Hi I can run off a copy and send it onto you and let you have one of the hand books as well. I found one thats not been used still dry with no oil on it.

[abdulazman]

Hi crashbang,
I tried to upload the files for you but couldn't as it is in PDF Format and we are given only 100 KB. There are also supplement instruction like RI.13.F2.56, Coded 084U2015-2019. Do you need that too ? How do I post to you?

[aawood1]

Any chance of a copy???

Yes, have sent Private Massage.

[aawood1]

Hi I will pop it in the post for you so it should be with you soon.

[aawood1]

Hi Crashbang.
Did you get the CD disc OK or has it got lost in the post.

[anand]

Hi
Why don't you send request at www.manikengineers.com They have exact equivalent of EKC30+EKC31 called FKD40+FKD41. I am sure their manual will also be same as EKC 30.
Regards
Anand

[crashbang]

Thanks for the effort! Just as I get manuals for a site, we go and lose it!!

Thanks to all!!