Results 1 to 2 of 2
Thread: I need a design program
-
24-12-2005, 12:16 AM #1
I need a design program
Anyone know of a computer program to help determine BTU requirements for refrigerated display cases. I know they make them for dwellings and have used it but was hoping there was something better. possibly free? Merry Christmas and Happy Hannakah. Ken
-
24-12-2005, 11:27 AM #2
Re: I need a design program
this might be of use.
http://au.refrignet.danfoss.com/SW/A..._au/index.htm?
and this link you could use at some stage too
http://www.eere.energy.gov/buildings...gename_menu=pcLast edited by fridg; 24-12-2005 at 11:41 AM.
The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.
Similar Threads
-
capillary tube design
By Chris Zahrt in forum FundamentalsReplies: 5Last Post: 04-06-2009, 09:16 PM -
System design: first cost or operating cost?
By US Iceman in forum NH3Replies: 35Last Post: 13-12-2006, 11:51 AM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM