If OC power switch off, OC will start doing initialization for 45 mins (estimated) for 200 model.
During this initialization time, you found it difficult to judge TH1 (compressor discharged temperature) and as well as compressor speed. (Anyway all will reset during initialization)
However (for cooling), Tc should be reached around 54C. and Te should be around 5C: TH1 should be 107C. Condense outlet temperature TH5 should be around 50C.
For heating
Tc = 50C, Te= -3C and TH1=100C and TH5=-2C
If SOG, run cooling mode to make refrigerant adjustment via looking at BC controller's sub-cooling (inlet and outlet).