Results 1 to 4 of 4
Thread: Dunham-Bush chiller
-
26-07-2005, 12:28 AM #1
regular poster
- Join Date
- Jul 2004
- Location
- england
- Age
- 52
- Posts
- 64
- Rep Power
- 20
Dunham-Bush chiller
Has anybody got any info on the danfoss controller, recip chiller made in 1999. After the fault codes for the alarms it displays them as a four digit code ie: 1452.
-
26-07-2005, 07:42 PM #2
Super Moderator
- Join Date
- Oct 2001
- Location
- Nottingham UK
- Posts
- 5,668
- Rep Power
- 51
Re: Dunham-Bush chiller
I haven't got a list of codes for all controllers but have a look here for your controller http://www.danfoss.com/BusinessAreas...umentation.htm
-
26-07-2005, 08:35 PM #3
regular poster
- Join Date
- Jul 2004
- Location
- england
- Age
- 52
- Posts
- 64
- Rep Power
- 20
Re: Dunham-Bush chiller
Thanks for that.
-
14-08-2005, 07:07 AM #4
improving poster
- Join Date
- Aug 2005
- Location
- USA
- Age
- 59
- Posts
- 25
- Rep Power
- 0
Re: Dunham-Bush chiller
Is it a AKC-W3 controller? or is it an MP 2000 . For the W3 contact Marshall McCulloch at Danfoss in Denmark, if you need to know anything else on this then let me know.
Similar Threads
-
Dunham Bush Chiller Alarm
By Regulator in forum Air ConditioningReplies: 11Last Post: 08-12-2010, 01:42 AM -
DIY aquarium chiller
By BarraCuda in forum Technical DiscussionsReplies: 18Last Post: 06-10-2010, 11:02 PM -
Dunham Bush
By frank in forum Air ConditioningReplies: 9Last Post: 03-09-2005, 05:38 PM -
Dunham Bush Chillers
By frank in forum Air ConditioningReplies: 14Last Post: 11-08-2002, 12:13 AM
