Results 1 to 2 of 2
  1. 14-07-2005, 06:39 PM #1
    bobjob's Avatar
    bobjob
    bobjob is offline regular poster
    Join Date
    Mar 2005
    Location
    Birmingham U.K.
    Age
    70
    Posts
    54
    Rep Power
    20

    Mitsu Heavy Industry



    Worked today on a number of ceiling cassettes from Mitsu Heavy industries

    2 x Model no FDTA 251 indoors

    Everything seems to be working ok but noticed that the wall controller display goes from the setpoint temp, set fan speed, louver position etc to show the display of 0.0hz then it goes back to the normal setting display.
    The controller display changes about every 10secounds.

    Is this normal for this range of Mitsu units

    Bobjob


  2. 14-07-2005, 11:00 PM #2
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Mitsu Heavy Industry

    Interesting ....................
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
« Previous Thread | Next Thread »

Similar Threads

  1. Mitsi HEAVY
    By Latte in forum Air Conditioning
    Replies: 4
    Last Post: 27-01-2006, 02:21 PM
  2. Mitsu Heavy Ind. Fault Codes...
    By Scooby in forum Air Conditioning
    Replies: 1
    Last Post: 08-12-2005, 08:37 PM
  3. Mitsubishi Heavy Industry
    By Abe in forum Air Conditioning
    Replies: 7
    Last Post: 09-03-2005, 08:37 AM
  4. Mitsu
    By Abe in forum Air Conditioning
    Replies: 11
    Last Post: 05-01-2003, 02:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules