Results 1 to 30 of 30
Threaded View
-
10-07-2001, 05:37 AM #1
automating a chilled brine refrigeration system using ammonia refrigerant
Subj. system uses two stage "grasso" type reciprocating compressors but requires following manual operations during start-up to avoid liquid stroke :
a) start compressor
b) operator checks by sound for automatic loading of one
cylinder
b) immediately upon loading of the said cylinder the 2nd stage
suction valve is gradually opened taking care liquid does not
enter compressor
c) next the 1st stage suction valve is gradually opened again
taking care liquid does not enter compressor
Any ideas ?Last edited by luciom; 10-07-2001 at 05:39 AM.
Similar Threads
-
ammonia refrigeration system
By Lc_shi in forum FundamentalsReplies: 48Last Post: 25-06-2010, 10:03 AM -
CARE refigerants by BOC
By dogma in forum RefrigerantsReplies: 8Last Post: 23-03-2010, 12:39 PM