Results 1 to 4 of 4

Thread: Future FFa 90

  1. #1
    Join Date
    Oct 2004
    Location
    Australia
    Age
    64
    Posts
    41
    Rep Power
    0

    Future FFa 90



    G'day lads i have a question for the techs in england. I was called to a domestic ref ive never seen before some one imported a contianer of used and/or damaged future refs. The fault was running continuosly freezer is too cold and provisonal compartment to cold at bottem and warm at top. Its an upside down job. I found the p/c compartment baffle fully shut. The 12 volt damper motor has circuits on both windings i assume one for each direction. There is no supply to motor. I have no idea where the thermistor is hidden or what resistance it should be. Does any one have any knowledge on this make and model , usual faults ect Appreciate any clues.



  2. #2
    Join Date
    Dec 2001
    Location
    Cleveland
    Posts
    41
    Rep Power
    0

    Re: Future FFa 90

    Hello CoolKev
    I do not know if this is useful but you can look on the hotpoint site at www.hotpoint.co.uk and get the user instructions for the FFA 90

    Regards
    Dave Goodings

  3. #3
    Join Date
    Oct 2004
    Location
    Australia
    Age
    64
    Posts
    41
    Rep Power
    0

    Re: Future FFa 90

    Thanks Dave I'll take a look. At least Hotpoint is more than I did know on it we dont have this brand downunder.

  4. #4
    Join Date
    Mar 2001
    Location
    ireland
    Age
    53
    Posts
    1,450
    Rep Power
    41

    Re: Future FFa 90

    Try www.ukwhitegoods.co.uk found them very good for technical info.

    Al

Similar Threads

  1. HVAC system trend in the future
    By Lc_shi in forum Fundamentals
    Replies: 1
    Last Post: 17-05-2005, 08:50 AM
  2. what is future
    By milton in forum Trouble Shooting
    Replies: 4
    Last Post: 06-01-2005, 07:16 AM
  3. Insulation of the future?
    By Gary in forum New Technologies
    Replies: 7
    Last Post: 27-06-2004, 06:20 AM
  4. the future
    By Krups in forum New Technologies
    Replies: 4
    Last Post: 30-04-2004, 12:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •