BEKA capillary tube mat system

[Lc_shi]

who have used BEKA （Germany）capillary tube mat cooling system ？ I need to know the control ways of the system. thx in advance!

[Peter_1]

What are they fabricating? Didn't found their website.

[chemi-cool]

Is it something like this:
http://www.heka-eu.com/

Lol, I feel like I'm in a quiz show

Chemi

[chemi-cool]

At last,

www.beka-klima.de

And yes,

the previus post was a bull's eye.

Chemi

[Lc_shi]

Chemi,Peter,
thx!
Yes. i see it.
It seems not well known company in Europe.i'm not sure if their product are widely used.

rgds
lichuan

[chemi-cool]

Hi lichuan,

I'm not sure about it at all, but first I want to read about it.

Condensation is what I am worried about.

Chemi

[Peter_1]

I saw it a few times on an exhibition.

Condensation is prevented by a dewpoint control.

The capacity these systems gives is not always sufficient to meet the needed cooling or heating loads. Additional heating must be installed.

They install it also on the walls. I wonder how you have to hang a painting afterwards.

I don't like this system for space heating because heat must be added as low as possible in a room.

[Blekoustom]

Hi, I'm Project Manager for Capillary tube system (from Beka company). We are (Hennlich.com) distributors for this system of heating/cooling. I must say It works perfectly even in administrative spaces as prefa-cassettes or if you use it as ceiling heatin-cooling system. No worries about raising hot air up, this system works as radiation system,t.m. all objects and floor in the room are heated-cooled by radiant heat. There's no need to double the system. Best connection is with heat pump. Look at g-term.cz, look at some references.Tomas Cerny