Results 1 to 4 of 4
-
01-03-2005, 12:12 PM #1
referigerants used in linear compressor
hi all,
I am yashwant,working as a trainee with Bosch and Siemens hause appliances,Germany.I have to find out problems in linear compressor.If anybody knows about linear compressor and referigerants used in linear compressor and oil free compressors and their problems..please do guide me.Thank you n waiting for your reply.
-
01-03-2005, 04:29 PM #2
Re: referigerants used in linear compressor
-
03-03-2005, 11:51 PM #3
Re: referigerants used in linear compressor
-
04-03-2005, 07:15 AM #4
Re: referigerants used in linear compressor
hello all,
thanks for ur reply but m not getting the problem of referigerant R600a and R134a in that compressor its oilfree compressor and referigerant itself works as lubricant ..but after some time this referigerant gets burned and there is blac slug on the cyliderwalls..due to this there occurs wear and tear of piston and cylinder.pls guide me thanks again.
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM