Results 1 to 4 of 4
Thread: Sabroe SMC 106
-
15-02-2010, 09:50 PM #1
Sabroe SMC 106
Hi guys
I had a call from a customer who wanted a fitting to convert the hand oil pump connection to a pipe thread. They thought the existing connection was 24 mm female but I think it's more like 30 or 32 mm female, does anyone know right off hand what it is. I can't get to there to check it.
Thanks
C Ice
-
15-02-2010, 11:32 PM #2
Re: Sabroe SMC 106
The connection in the crankcase is female G-3/4" The easiest conversion piece can usually be found at Williams Fluidair in Pickering. http://www.williamsfluidair.com/
-
16-02-2010, 12:51 AM #3
Re: Sabroe SMC 106
3/4 inch BSPP
-
16-02-2010, 10:38 AM #4
Re: Sabroe SMC 106
Mk 1+2 G3/4in,Mk 3+4 G 1/2 in.
Last edited by josef; 16-02-2010 at 11:20 AM.
Similar Threads
-
Sabroe Co2 compressor
By Sturt in forum Old Refrigeration PhotosReplies: 5Last Post: 19-02-2010, 03:29 PM -
sabroe plate freezer
By samlee12 in forum IndustrialReplies: 0Last Post: 25-11-2009, 11:48 PM -
Sabroe compressor
By ibraheem in forum Technical SpeculationsReplies: 1Last Post: 12-07-2009, 02:07 PM -
Vibration Dampers on Sabroe Compressors
By kelvin_27_84 in forum Industrial CompressorsReplies: 2Last Post: 11-05-2008, 05:55 PM -
sabroe water chiller
By dill in forum Air ConditioningReplies: 0Last Post: 17-12-2006, 07:26 PM