Results 1 to 16 of 16
Thread: 3phase compressor.
Threaded View
-
20-12-2004, 01:09 PM #1
3phase compressor.
Hi a quick brief, i had practical experience (dunno the english word) in school, i had this at a refrigerationcompany. The a/c experiments i did about a year ago or something are burried (some of you may remember the thread ). I understood that it was too much work and money, better buy a new one.
Well well, in the end of my "practice" i asked if i could take some stuff in their container (used, broken things) to learn the wiring and so on. So i got 2 L'unite Hermetique TAH5540E compressors, i know these are quite big and so on. I just want to see if they work so i sent a mail to tecumseh-europe and got a datasheet.
One thing is that i got two pdf-files and they show different wiringdiagrams both :S.
Here's a pic of the both:
There are no neutral going to the compressor, is this some kind of D-connection?
I would ask my teacher at school, but the christmasholiday started today..
/TomiLast edited by Pandrone; 20-12-2004 at 01:14 PM.
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM