Results 1 to 3 of 3
Thread: Vacuum specification
-
13-11-2009, 08:58 PM #1
Vacuum specification
Anybody can venture an opinion !! Does anyone have a definitive spec for the depth of vacuum in a close control unit, My thoughts are 1-2 mbar (750-1500 microns) the local agent for the machine is asking for 400 microns and can't give a valid reason why it has to be so low. Can you help me ?
-
14-11-2009, 12:05 AM #2
Re: Vacuum specification
Because 400 is drier than 750 ??
Around 1000 micron for AC stuff but you should go lower for refrigeration type levels.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
12-01-2010, 05:06 AM #3
Re: Vacuum specification
500 microns is a good pull the reason being is if you got a tight system youll get that if it leaks you wont.
Similar Threads
-
Vacuum Pump Questions
By position1 in forum FundamentalsReplies: 7Last Post: 08-10-2009, 02:33 AM -
Vacuum cleaner as a vacuum pump
By chemi-cool in forum Chit Chat & Service StoriesReplies: 18Last Post: 14-08-2009, 10:11 PM -
Troubleshooting a vacuum pump and gauge set.
By Old Codger in forum FundamentalsReplies: 7Last Post: 08-08-2008, 05:13 PM -
inverters pulling vacuum
By bangoman in forum Air ConditioningReplies: 2Last Post: 05-02-2008, 09:12 PM -
Vacuum test
By Peter_1 in forum FundamentalsReplies: 15Last Post: 13-10-2006, 09:04 PM