Results 1 to 1 of 1
Thread: TXV Selection
-
22-09-2009, 06:23 PM #1
TXV Selection
New Member here and attempting to get help addressing a personal weakness in the HVAC industry.
I have a matched set of evaporator coils and condensing units for a 5T heat pump application that will use R410A refrigerant.
My question is in regard to the correct TXV for the evaporator.
I have been told to use the same valve we have used in standard DX applications ( Sporlan HCAE-5Z ), and I have been told that that we should be using something different for the heatpump application.
Can anyone help with the proper choice and perhaps provide a little education as to the differences if an alternate is required?
Similar Threads
-
selection and sizing
By MIT in forum Technical DiscussionsReplies: 2Last Post: 22-06-2009, 11:27 PM -
TX Valve Selection: PHT or TE
By JERRYCOOL in forum IndustrialReplies: 6Last Post: 05-08-2008, 02:10 AM -
PHE selection software
By thoist in forum Tools and CalculatorsReplies: 2Last Post: 04-07-2007, 03:56 PM -
selection of NH3 recierculation system/vessels
By SimonBrown in forum NH3Replies: 3Last Post: 19-02-2007, 04:22 PM -
selection of centrifugal fan
By watana in forum Air ConditioningReplies: 0Last Post: 14-09-2003, 04:02 AM