Results 1 to 4 of 4
-
30-08-2009, 10:08 AM #1
setting up a beer chiller at home
I am about to move out with some mates and wanted to look at setting up a little system similar to in a pub the only problem is I have never worked on one to see how they are set up. Is anyone able to help me out with ideas on how to set it up and what to start tracking down parts wise to get me going on the right track. Hope this is in the right section, cheers everyone,
chris.
-
30-08-2009, 10:12 AM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: setting up a beer chiller at home
-
01-09-2009, 10:15 PM #3
Re: setting up a beer chiller at home
get down the pub mate
-
03-09-2009, 12:40 AM #4
Re: setting up a beer chiller at home
find a large 2 door cab and tap your kegs in their ours hold 5 50 litre kegs and ample room for cartons and glasses and coke if your that way inclined.it was a left over from a qantas club refit with a 7/8 hp unit mounted on top(hot beer down to drinkable in 20 mins with cans in airflow from evap),they only wanted the doors for a reach in coolroom thus unit being on top or remote how it is now means no busting your back lifting kegs up 400mm.have been meaning to use it for my avatar and will update it soon.
temprite and 750 valve or glycol system is to restricted in use however a mate had a temprite with tap mounted over his kitchen sink until he got involved in the opposite sex,it quickly disappeared.mmm to beer or not to beer...........lets drink breakfast
Similar Threads
-
Beer Chiller Malfunction
By glennk in forum Trouble ShootingReplies: 14Last Post: 05-08-2009, 12:36 AM -
Beer Chiller Motor/Mixer
By fredrick_more in forum CommercialReplies: 36Last Post: 13-10-2008, 06:45 PM -
Beer chiller
By chalkie in forum Trouble ShootingReplies: 2Last Post: 30-07-2008, 11:40 PM -
If Operating Systems Were Beers
By nike123 in forum Chit Chat & Service StoriesReplies: 1Last Post: 28-04-2008, 10:53 PM -
LP switch pressure setting for Pump Down of Chiller
By venugopal in forum Technical DiscussionsReplies: 9Last Post: 12-11-2006, 07:18 PM