help needed

[Leo1967]

Hope someone could help,looking for any manual and electric diagrams for a Carrier water chiller model 30GF 155A 1918 BEE manufactured in 1989
Many thanks in advance
Leo

[rbartlett]

leo

you and me both...

http://groups.google.co.uk/groups?q=...gin.net&rnum=2

http://groups.google.co.uk/groups?hl...net%26rnum%3D1

however it's just sprung to mind that a guy i took on -ken- as pretty much the last thing i did at my old company had just left carrier

i'll give him a ring and ask him if he has info

cheers

richard

[FreezerGeezer]

Will Carrier Tech. support not supply them??

[Leo1967]

Thanks very much,i appreciate your help Richard.
I've been looking at two of such units,one of them has a faulty compressor while the other sometimes gives a fault code (53)and comp.no three stops.While it runs i cannot find anything wrong with it,amps are exactly the same as the other comps.I measured the insulation with a megger and it looks just fine.I noticed a "bulb" and i think it measures the discharge temperature.....could that be the fault?these chillers are managed by a control which i think is called flotronic.Unfortunally i haven't got any literature whatsoever regarding the control or the chiller.
Any help would be appreciated!
Thanks
Leo

[Peter_1]

I have a manual of the Prodialog of Carrier.
Is it this what you'r looking for?

[chemi-cool]

Hi Leo.

Carrier give out all the information you need on their website.

You must know the manufacturing factoty.
In your case, I belive it was made in France.

www.carrier.com

Ciao

Chemi

[Leo1967]

Thanks for your help.........Freezer,on their web site they only give literature for the latest models.....Peter,thanks can you send it to my e-mail?
Shalom to you Chemi,nice guess it's made in France.......would that help if i search in the Carrier site?
Thanks everyone!
Leo

[Leo1967]

I found it!!!Thanks everyone!Thanks Chemi,i just selected the country and everything appeared!Installation manuals in french,electric diagrams in english!My "mishegass"didn't let me see it!!!
Thanks again everyone.......i have work to do now
Leo

[chemi-cool]

Yes.
You should look for the country on their web site and then you will search your model no.

If you have any problems. let me know and I will help.

By the way, it wasn't a guess, the factory in France covers Europe and Middle East customers but also the Japanese factory does.

Chemi