Results 1 to 3 of 3
Thread: VRV III autocharge function
-
14-05-2009, 08:34 PM #1
VRV III autocharge function
I'm going to recharge a system which has no refrigerant inside after a compressor change. I know what the factory charge is and it's pretty simple to get this in. What is the procedure for using the autocharge facility for adding the trim charge?
-
15-05-2009, 06:04 PM #2
Re: VRV III autocharge function
i don't know how to do this, i would say get hold of the install/service manual.
i have heard that some weird outcomes can occur from this auto charge facility, and the last time i spoke to daikin direct tech they said don't bother using it? i dont know if things have changed now as the kit was new to the uk at the time? i know its a ball ache but the safest thing to do is measure out liquid line sizes and lengths then calculate it yourself, you know for sure its correct then.
-
15-05-2009, 06:17 PM #3
Re: VRV III autocharge function
i agree we have a site with a fair few of these on and have had some funny results wit auto charge,the old fashion is still best
Paul
"KEEP IT COOL"
Similar Threads
-
The function of Crankcase heaters
By Peedee in forum FundamentalsReplies: 6Last Post: 10-03-2009, 12:56 AM -
RCE1 wired controller reduced function
By Krolroger in forum Trouble ShootingReplies: 2Last Post: 15-02-2009, 09:46 PM -
Function of Economiser and intercooler
By patilvasudeo in forum FundamentalsReplies: 2Last Post: 30-06-2008, 08:26 PM -
the function of the electronic expansion valve
By Crystal-426 in forum FundamentalsReplies: 10Last Post: 22-06-2008, 12:29 PM -
lg fridge/freezer fault light on function display board
By bazza in forum Trouble ShootingReplies: 0Last Post: 25-02-2007, 03:25 PM