York CX-TDC9E chiller controller

[iceman007]

Hi.

Does anyone have a manual for the York CX-TDC9E terminal controller. I used to have but seem to have lost it. We have a YRK machine which will not unload and this controller seems to be the problem.

Thanks

[Grizzly]

Hi.

Does anyone have a manual for the York CX-TDC9E terminal controller. I used to have but seem to have lost it. We have a YRK machine which will not unload and this controller seems to be the problem.

Thanks

Iceman.
It may sound stupid but I thought York equipment codes were either 2 or 4 letters.
Unless it is a Unitary product and that's a different Story!
What type of chiller is it?
Cheers Grizzly

[iceman007]

It's an old R11 centrifugal machine (can't remember YK YRTK or something)

I need literature for the terminal controller.

[Grizzly]

It's an old R11 centrifugal machine (can't remember YK YRTK or something)

I need literature for the terminal controller.

I have just read your reply.
But as I am off to work.
I can't do anything right now.
So when I get back I will have a look through my paper archive, as it is that old!
This is pre Millenium panel I presume?
Grizzly

[iceman007]

Yes it's pre Millenium, probably mid 1980's and it is probably one of the older turbo machines.

Thanks

[Grizzly]

Sorry Iceman,
My first look into the paperwork has drawn a blank,
I will have another look tonight as work calls again.
Maybe someone else can help?
Grizzly

[salam]

where can i check for refrigeration capilary tube sizes for depodn up on ton pls replay

[rakesh06]

hi i think . i has the booklet in work . what u want to know about the chiller ?