Results 1 to 7 of 7
Thread: Plate freezer enclosures
-
21-10-2008, 12:11 PM #1
Plate freezer enclosures
One of our customers got HZ plate freezers with Open plates. Now he plans to put up insulated enclosure for that. But using typical Hinged doors is not possible as there are conveyors etc in front of the freezers.
Are Night Blonds good enough for that? Can they be exposed to -25 deg temp directly?
I am not sure but DSI Denmark has a similar product for same applications.
Any inputs?
-
Re: Plate freezer enclosures
I'm not sure if I would use night blonds
We custom make covers for our horizontal freezers, I'm not sure what they are made of tho.
so I'm guessing if you find the right material anything is possible.
I have seen people use plastic coated tarpaulin and it cracks up and start falling apart after a few months.-Cheers-
Tycho
-
22-10-2008, 06:17 AM #3
Re: Plate freezer enclosures
Dear Tycho,
Can you give any hint on the material, a photo etc. That can help us a lot
-
Re: Plate freezer enclosures
Took some pictures earlier today with this in mind
I have no idea what material it is made of.
The stripe you see on the middle of it is for the block dividers since on this freezer they are about 2 inches higher than the plates, and without the reinforcement the fabric gets worn out over time, it also makes it easier to fold when they take it off.
-Cheers-
Tycho
-
23-10-2008, 05:24 AM #5
Re: Plate freezer enclosures
Many thanks for the pictures. I can try & find out what it is. It seems to be made in Denmark.
-
Re: Plate freezer enclosures
http://www.mmc.no is the link to the company that has the name on it
-Cheers-
Tycho
-
23-10-2008, 09:14 AM #7
Re: Plate freezer enclosures
http://www.mmctendos.no/cgi-bin/weba...id=2104&c=1088
This is a company based in Norway.
I have sent a mil to them to know more about the product. Many thanks again.
Similar Threads
-
High Humidity in Plate freezer room
By smpsmp45 in forum NH3Replies: 3Last Post: 23-09-2008, 08:13 AM -
Hotpoint FFA71 Freezer High Temp Light / Fridge is Freezing
By sumnerpa in forum Trouble ShootingReplies: 1Last Post: 19-08-2008, 03:16 PM -
Plate freezer - material removal from trays
By smpsmp45 in forum NH3Replies: 12Last Post: 15-09-2007, 01:30 AM -
Trolley freezer & blast freezer
By smpsmp45 in forum NH3Replies: 0Last Post: 25-08-2007, 07:29 AM -
plate Freezer construction
By smpsmp45 in forum NH3Replies: 4Last Post: 25-08-2007, 04:43 AM