Results 1 to 22 of 22
Thread: Henry Ball valves
-
20-02-2004, 06:27 PM #1
Henry Ball valves
Hi all
Anyone experienced a high number of leaking Henry Ball Valves ,not older ones but new ones installed to spec .
The valve is recognised to leak from the stem of the valve ,therfore the only form of leak prevention is via the secondary seal between the brass cap and the valve body.
Anyone else had this?.
regards mark
-
20-02-2004, 06:57 PM #2
dont use henry.
change to carly, apolo or danfoss.
they hardly leak.
chemi
-
20-02-2004, 07:01 PM #3
Henry Ball valves
Lol chemi-cool
Ever heard the saying "its like shutting the gate once the horse has bolted"
-
20-02-2004, 07:08 PM #4
yes,
we have our own version, it goes: לנעול את השער אחרי שהסוסים ברחו
chemi
-
20-02-2004, 07:56 PM #5
לנעול את השער אחרי שהסוסים ברחו
that's easy for you to say !! ;-)
cheers
richard
-
20-02-2004, 07:57 PM #6
- Join Date
- Jan 2001
- Location
- Fife, Scotland.
- Age
- 66
- Posts
- 1,105
- Blog Entries
- 2
- Rep Power
- 20
nuts, the babble translator just went nuts
-
20-02-2004, 09:21 PM #7
just love XP profetional!
i
n english its: "its like shutting the gate once the horse has bolted"
chemi
-
15-03-2004, 11:36 PM #8
Henry Ball valves
Ray wheres your post gone?
Did you change your mind
-
16-03-2004, 12:45 AM #9dont use henry.
change to carly, apolo or danfoss.Prof Sporlan
-
16-03-2004, 12:59 AM #10
No Didnt Change my mind they are still s***
Was going to edit but wasn't paying much atention and deleted instead.
Anyway Mark, Isn't it late for you, Jnr keeping you up or you on an all nighter playing with your'e ipod
Regards
Raymond
-
16-03-2004, 08:15 AM #11
Henry Ball valves
I-Paq actually if your going to have a joke Lol at least use the correct terminology.
-
16-03-2004, 07:28 PM #12
Very Sorry, Can't keep up with all this modern technology.
I will just keep plodding along with my old 286.
Regards
Raymond
-
16-03-2004, 07:36 PM #13
raymond,
remind me next year when I'll buy a new one. I will give you my "old" pentium.
chemi
-
16-03-2004, 08:10 PM #14
Henry Ball valves
Hi raymond
Ive sold my I-paq actually considering the palm to replace it .
-
16-03-2004, 08:51 PM #15
Stop Mucking about, Just buy a laptop for the van.
I am sure you had earned enough this year to cover it
Regards
Raymond
-
17-03-2004, 06:20 PM #16
Henry Ball valves
I am sure you had earned enough this year to cover it
You seem to know what your talking about ray
-
19-03-2004, 09:44 PM #17
I sit in the slow lane in my clapped our vauxhall astra & see all you lot in the fast lane in your'e BMW's,Volvo's & Merc's
But the way you have open the flood gates with this thread, now we are looking (Mostly on roof area's) we are finding leaky valves !!!
Regards
Raymond
-
23-04-2004, 08:15 PM #18
Re: Henry Ball valves
Hi Ray
Apparently,Henry supply a valve stem repair kit know.
Not that the problems recognized of course.
LOL.
Regards Mark
-
23-04-2004, 08:32 PM #19
Re: Henry Ball valves
Is this because it is going to cost them a fortune in warranty replacements or are they just thinking of the customer (REALLY)!!!!!.
Whats the latest, i hear they are going round the "M" stores trying to blame it on engineers overheating them when installing.
Regards
Raymond
-
23-04-2004, 08:37 PM #20
Re: Henry Ball valves
Whats the latest, i hear they are going round the "M" stores trying to blame it on engineers overheating them when installing.
-
02-08-2004, 10:24 PM #21
Re: Henry Ball valves
hi Mark.
Yes we have had several leaking from the stems on brand new stores we have taken over,
We have since cut them out and replaced them.
all on R404a and several different sizes 13/8 and 15/8.
Hope this helps I assumed that had maybe they been overheated on installation , but as we did not install them it was just a guess.
Homelover,
-
07-08-2004, 08:15 AM #22
Re: Henry Ball valves
Hi,
I allways specify another make of valve now
Best regards MarkLast edited by Mark; 12-05-2007 at 04:19 PM.
Similar Threads
-
Stainless steel valves
By Tycho in forum NH3Replies: 5Last Post: 05-11-2008, 02:16 PM -
Hinari and how far to open valves
By stryker in forum Air ConditioningReplies: 6Last Post: 14-04-2008, 01:47 AM -
Suction Stop Valves
By frank in forum Air ConditioningReplies: 10Last Post: 02-08-2006, 11:04 PM -
Glycol water valves
By eng_ab in forum IndustrialReplies: 2Last Post: 03-06-2005, 09:15 PM -
Positon of tx valves
By Les Stuart in forum Trouble ShootingReplies: 5Last Post: 16-11-2003, 04:43 PM