Results 1 to 7 of 7
Thread: Need a new vacuum pump
-
07-08-2008, 07:30 PM #1
Need a new vacuum pump
After 28 years of excellent service, my Gould vacuum pump have started to leak from the mechanical seal.
Nobody at Goulds pumps in the US of A can help, so, I'm looking for a new one.
I was offered the Spanish Telstar.
Doe's any one have any experience with it?
-
07-08-2008, 07:35 PM #2
Re: Need a new vacuum pump
Wouldn't it be easier to just replace the seal?
I'm sure it will be a standard one, available from any good mechanical wholesaler.
As it's only 28 years old, it must be worth repairing it...
-
07-08-2008, 09:30 PM #3
Re: Need a new vacuum pump
Good thought..................
One little problem though,
How am I going to vacuum when my pump is in pieces???????????
-
07-08-2008, 09:35 PM #4
Re: Need a new vacuum pump
if you after a new one its the javac shark vac pump everytime for me
Shark Vacuum Pump Douple stage high vacuum pump, unique robust construction.
· Dual port 1/4", 3/8" SAE Flare.
· Inlet isolation valve.
· Built in oil pump with anti-suck back.
· Quiet running, cool to touch.
· Recognised pump down curve for maximum pump down time.
· High preformance gas ballast.
Capacity 5.2 cfm Vacuum <15 micron Part Number VNR-152-2.
Paul
"KEEP IT COOL"
-
11-08-2008, 09:48 PM #5
-
11-08-2008, 09:50 PM #6
Re: Need a new vacuum pump
Why,
its all in the sound you now, recognize when she's done whit her job. never wrong.
Ice
-
12-08-2008, 07:48 PM #7
Re: Need a new vacuum pump
This is going to be the new pump, will give me time to carefully repair the old one.
http://www.telstar-vacuum.com/en/pro...cuum+pumps.htm
Similar Threads
-
Vacuum cleaner as a vacuum pump
By chemi-cool in forum Chit Chat & Service StoriesReplies: 18Last Post: 14-08-2009, 10:11 PM -
Vacuum Pump CFM
By w.l.ong in forum Technical SpeculationsReplies: 11Last Post: 27-10-2008, 02:20 PM -
Troubleshooting a vacuum pump and gauge set.
By Old Codger in forum FundamentalsReplies: 7Last Post: 08-08-2008, 05:13 PM -
Vacuum Pump in a Hazardous Area?
By Cold Down Under in forum HydrocarbonsReplies: 3Last Post: 08-06-2008, 12:20 PM -
inverters pulling vacuum
By bangoman in forum Air ConditioningReplies: 2Last Post: 05-02-2008, 09:12 PM