Results 1 to 10 of 10
Thread: over size
-
12-06-2008, 01:15 PM #1
over size
hi engineer
when compressor hp is much more bigger than cooier coil what is correct pressure and charging.
-
12-06-2008, 01:29 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: over size
-
12-06-2008, 01:50 PM #3
-
12-06-2008, 03:00 PM #4
Re: over size
Compressor HP has nothing to do with the coil size.
The compressor capacity should be matched with the total evaporator capacity only (including the TXV and other components).If all else fails, ask for help.
-
12-06-2008, 03:10 PM #5
-
12-06-2008, 03:17 PM #6
-
12-06-2008, 05:09 PM #7
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: over size
-
12-06-2008, 10:02 PM #8
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: over size
I made some videos for you!
Evaporator TD
Condenser TD
Password for both files is same and sent to you by visitor message.Last edited by nike123; 12-06-2008 at 10:05 PM.
-
13-06-2008, 02:36 AM #9
Re: over size
I do not mean to discredit anyone here, but these questions are being asked and replied to in a confusing order.
HP for compressors and coils is not related and the aspects of charging for pressures lead me to believe this is a fundamentally flawed conversation.
A lot of this material has been asked and answered in various locations on this site (probably multiple times). I suggest a search be performed for some of the questions you have and then spend some time reading the posts.
It's not that I mind trying to answer some questions, but these two questions are not related at all.Last edited by US Iceman; 13-06-2008 at 02:37 AM. Reason: spelling
If all else fails, ask for help.
-
22-06-2008, 05:10 PM #10
Similar Threads
-
Duct Size Calculations
By hamidpia in forum Tools and CalculatorsReplies: 17Last Post: 21-06-2010, 01:56 PM -
Molecule size?
By nike123 in forum FundamentalsReplies: 7Last Post: 03-03-2008, 01:14 AM -
Evaporator design: minimal channel size.
By DaBit in forum CPU OverclockersReplies: 9Last Post: 05-06-2003, 03:47 PM -
Urgent!!! S.O.S. - nozzle size
By herefishy in forum FundamentalsReplies: 3Last Post: 25-05-2002, 10:29 PM