Results 1 to 3 of 3
Thread: Need Advice
-
13-05-2008, 05:59 PM #1
Need Advice
Hi guys
Need some advice, i friend of mine has a small shop of 600 square foot needs to get some air conditioning fitted as choc's etc are melting in heat, thing is i dont do them and he has been quoted 4grand to install a 5.5kw hitachi spilt system. is this the going rate as i thought it was bit to much, am i rite that he is being ripped off or this normal if so than i need to learn how to fit these..
-
13-05-2008, 08:03 PM #2
Re: Need Advice
Difficult to say not having seen the job. £4k does sound a tad high. Alot will depend on what's included - or more to the point what isn't. I quoted a 6.3kW MHI system today without electrics, 15m pipe-work wall bracket (outdoor 1.8m above ground), condensate pump, no parking / congestion charges & a 1 day install for £2,100+vat.
Sounds like your mate might want to shop arround a bit. I'm all for making a profit but not a killing.If in doubt read the instructions. If still in doubt follow them.
-
13-05-2008, 11:00 PM #3
Re: Need Advice
If your friend needs an alternative quote PM me and I'll get our Coggleshall office to do a survey and quote you something more reasonable. BTW i assume we are talking about high wall systems cos Cassettes or Under Ceiling models would cost more as would the power supply if you wanted the frigee to do it - we have qualified Frig & lekki engineers.
If in doubt read the instructions. If still in doubt follow them.
Similar Threads
-
Need Advice on Refrigerant Line Diameter on install that was just done!
By mcu in forum Heat PumpsReplies: 17Last Post: 29-02-2008, 12:38 PM -
Career advice please.
By james 100 in forum Chit Chat & Service StoriesReplies: 14Last Post: 13-09-2007, 06:37 PM -
Advice Needed!
By Tim_Uk_Trainee in forum TrainingReplies: 4Last Post: 05-06-2005, 11:01 PM -
Advice for newbie - please be kind..!
By electricstuff in forum Air ConditioningReplies: 11Last Post: 04-10-2004, 06:52 PM -
Good advice!
By shogun7 in forum Chit Chat & Service StoriesReplies: 0Last Post: 03-09-2004, 01:06 AM