Results 1 to 4 of 4
Thread: 90 degrees evaporator
-
20-05-2003, 05:37 PM #1
90 degrees evaporator
Where could I find a fan evaporator able to to blow its air flow in two directions 90 degrees each other? Any suggestion about manufacturer of such a similar device? Have a look to the attached sketch...
Thanks for any incoming suggestion.
Regards
-
20-05-2003, 07:02 PM #2
Hi Coriolan,
bit of a strange configuration, I would expect you would have to get this made by a cooler manufacturer specially. Whether or not this would be viable would depend on the size and number required.
Goehart would be my first choice, but there is others, Kuba ect.
Regards, Andy
-
21-05-2003, 08:35 AM #3
Hi Andy,
thanks a lot, even if you told me what I was afraid of....
Anyway I'll find some trick to reach the result.
Have a nice day and thanks again.
Coriolan
-
23-05-2003, 05:02 AM #4
Why not put two unit coolers at right angles to each other? What am I missing?
Similar Threads
-
Designing Roll Bond Evaporator
By Munzar Ata in forum FundamentalsReplies: 11Last Post: 05-08-2010, 11:31 AM -
Air Source Heat Pump - temp of refrigerant leaving evaporator
By anup in forum FundamentalsReplies: 3Last Post: 06-11-2006, 05:04 AM -
Change evaporator
By tralex in forum FundamentalsReplies: 6Last Post: 29-12-2005, 07:53 PM -
Article in ACH&R News
By Gary in forum FundamentalsReplies: 8Last Post: 20-05-2003, 12:27 AM -
temperature difference of evaporator coil
By dantoubiana in forum Trouble ShootingReplies: 12Last Post: 03-05-2003, 03:46 AM