Results 1 to 2 of 2
Thread: FRIGA BOHN evaporator T1F6-4E2
-
14-12-2007, 07:08 PM #1
FRIGA BOHN evaporator T1F6-4E2
Hi all
I need some help about a blast room equipment data.
I have a Copeland compressor with no reference (it was painted), connected to a FRIGA BOHN evaporator nodel T1F6-4E2, series FE3955. We are trying to get the compressor data.
We are reading 90 A per phase on the compressor. We want to know if this is normal or the electrical side has a problem.
Can anyone help us on this matter?
José Rocha
-
17-12-2007, 06:29 PM #2
Re: FRIGA BOHN evaporator T1F6-4E2
This is very hard to call not having specific information on the compressor. I tried to get an approximate match by looking up your evap, but it was not listed.
90A per phase indicates by my approximate reckoning typical of a compressor of around 25/30 HP. You don't say if your blast room is chiller or freezer or how big ?
Similar Threads
-
Friga Bohn correction factors
By Andy W in forum CommercialReplies: 22Last Post: 18-02-2008, 01:56 PM -
Trouble With A Bohn
By stangman in forum Trouble ShootingReplies: 0Last Post: 23-08-2007, 03:48 AM