Results 1 to 7 of 7
Threaded View
-
04-03-2003, 07:40 PM #1
Oil changeover from mineral oil to POE in compressor
Hello,
We have a reciprocating semi hermetic compressor with mineral oil and i want to change oil to POE because i want to use this compressor in a cooling unit running with R407C...
First of all i would like to learn how can i removed the mineral oil from the compressor and before add the POE lubricant i have to vacuum the compressor or not? If these lubricants are mixed each other a little, is there any problem in running the system?
I hope i explain my questions enough...
Best Regards
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM