Results 1 to 3 of 3
-
22-11-2007, 09:10 PM #1
Adam 2000 Building Management System
Has anyone come across this system ? If so could you advise on what kind of software that may be used to edit the settings. Adams themselves say on their website that no special software is needed , however I would deduce that "some" kind of software would be required to interface with the panel. Any help or advice is greatfully appreciated.
Steve
-
22-11-2007, 11:45 PM #2
Re: Adam 2000 Building Management System
As they say 'standard communications software I would assume that Terminal Emulator would get you started.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
23-11-2007, 06:38 PM #3
Re: Adam 2000 Building Management System
Thanks Brian
I did try a couple of different programs but they couldn't see the panel. Ah well looks like it's back to basics , remove the panel and fit timers.
Steve
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM -
help building an inverter system
By max2 in forum Air ConditioningReplies: 9Last Post: 31-07-2007, 08:36 PM -
Refrigeration system proposal; comments please.
By DaBit in forum Technical SpeculationsReplies: 13Last Post: 01-01-2003, 03:42 PM