Thank you, I promise you I will do my best.
Printable View
Thank you, I promise you I will do my best.
hello, everybody
I am alfredo, sorry for late posting here because i,m busy with my projects, i am having problems with the air conditioning system right no. How can i solve condensation on my diffuser and ducting system
Welcome Alfredo but you posted you question in the introduction forum.
You have to avoid reaching the condensation level of the surrounding air. That's all.
Samarjit, no..don't do it. ;)
Hello Everybody.
i am new to this site.
im shocked i've never seen it before.
great place for people in our industry to talk and discuss many things.
i am becoming quite addicted!
Thanks for having me.
Youssef.
Hello everybody,
I'm a newbie here, i'm from a far country, indonesia, in my country, people uses many refrigeration system with various setting... and now i'm busy to analyse and trying to mix refrigerant with other refrigerant to create a new one which have a new properties,
i think it's important to have a community like this, so we can discuss and share our problem and solve it together, so i join up. Hopefully I can learn something new that i don't know before through this forum.
thanks
Welcome to the forum DRS, good luck with your chemical recipes.
Im new here,
Im Lookin for the introductions forum, But I could not find it.
So I decide to write my first post here.
I'm looking for compressor oil "Maneurop oil 160P" and Tecumseh compressor 110V, 3/4 Hp
Anyone knows where i can get.
Thanks:rolleyes:
Cool site, here in Finland we do not have so meny people so not so many ref types so dont have a forum. Great forum just by browsing i have learned a lot.
To both 2 new members, welcome in our forum.
Share also your knowledge with us.
Hi all, just joined today & having a look around.
Hello everyone I am new and checking out the site.
Hello,
I am new to this forum,but part of this industry since 1974.I started in Southampton in the UK.Today I was looking for publications in refrigeration by GUY R. KING,and came across this forum of which I liked immediately.
So here I am and will be very pleased to participate,learn,share and be part of.
Best regards to all,
Jorge Cabrita
Welcome Jorge,
I'm sure you will find a second home here as we have many members here from a wide section of the industry.
Most of the Guy King books are out of print and you may be able to find second-hand copies on Amazon or Abe Books.
On task I have been thinking about is to find who owns the copyright to these books and see if we can get them re-published. They are getting hard to find, but very appropriate even today.
I'm very glad to say hello to the community of Refrigeration-Engineer.com.
I'm a mechanical engineer, aged 26 from Italy.
I'm in charge of the laboratory of a company that produces chest, upright freezers and coolers located in the south of Italy. It's my first work-experience so I'll be very happy to learn and receive tips from the members of the community.
I'm very interested in studying thermodynamics so i'll be pleased to have some tips about where to find useful and interesting articles, softwares, charts about refrigeration.
Best Regards,
Claudio Iaselli
Hello Claudio and a warm welcome to you, I hope that you enjoy the forum and do not be afraid to ask questions.
Claudio and Jorge, welcome from me on a cold morning in Belgium.
Claudio, are you working at Tasselli?
USIceman, I didn't know that Abe had a bookshop. :p
Hello to everyone!
I am new to RE, and I am very happy finding you.
I am building cold rooms for milk industry.
I am from Serbia, so for us HCPP standard is new.
If anyone have opinion about possible mistakes tell me.
Hello everyone, found this site by mistake looking for answers to a problem we had with a system on R408a and am glad i did, plenty of questions and answers here....
Welcome Vucko Antarktik and D_Man glad you guys are enjoying the site.
Hello to you all.
I just become a member of "RE", and work as a salesman in Sweden.
I found "RE" through google and im glad that i did:D
/ Jfriman
Hey, first post for me. Surfing the site for tasty bits of info. born and bred Kiwi (from New Zealand, not the fruit). Mostly industrial ammonia work but everything else in between. Interesting to see how the other side works.
Hiya This is Droffy, I am from Perth Western Australia and very new to the forum, I must say lot's of good stuff here. I have also had prob's finding the introduction forum so I am using this site, if I may. I do not have to much to say at the moment, but as time roll's on I am sure to drive you lot insane.
Cheers Droffy.:rolleyes:
Welcome to the Forum Kiwi & Droffy.
Hope you enjoy your stay and post plenty.
Claudio, could be a nickname http://www.isaitaly.com/html/tasselli.html
Worked some years at the Belgium importer of Tasselli.
sorry Peter,
it's a brand of the famous isa group as i can see.
I know IFI group located in Pesaro that produces similar appliances.
bye,
claudio
Hi, I´m from Venezuela, I hope learn and help here. My englihs is very bad, but I can read, thanks.
Hi everyone... i m from Kuala Lumpur, Malaysia... wish i'll learn a lot from this site... thanks. kind regards
hii people this is karthik
from India pursuing masters in Refrigeration and A/C
Hi my name is shawn I am from new york USA, I was browsing forum sights to get some ideas. I hope that i may share insight here as i wish other pros can share there insights with me.
In the mean time since i am a new member here i will browse to see if i may assist in tech advise in transport industry.
Hi folks...
I am having some queries regarding cross plot and component balancing. I noticed that "Peter_1" has posted some excellent stuff on this topic. I am wondering how can I contact "Peter_1" ? Is there some kind of private messaging option available on this forum?
refca
If you click on my name right side of my avatar, then you will see a dropdown list with the option Private message.
Try this once.
But you can ask it also here so that everyone can benefit from it.
Do this then in the Fundamentlas section of this forum
hello all frigoman and ac man (enginneers-techs).
i am from morocco.tangier just 15km from europe.
i am 44 years old. i have 22 years experience in refrigeration air conditioning field.i find this forum helpful for mi . i am frenche spanishe speaking well but i do my best for english . i am happy to be with the prfesionals withe i can shear and recive more aknawoldgs about the R.H.V.A.C my job in i enjoy
thanks hasta la vista
Hi everybody,
I'm new in here, I'm from Canada, Québec, Montréal to be more specific. So I hope I will find helpfull stuff here, the site look great.
I' work more on refrigeration, in pharmaceutical reasearch, as contractor at Merck Frosst Canada, and also on air conditioning, heating and ventilation.
If I can help somebody, I will be glad too.
So have a nice Chistmast and a happy new year to every body here.
Bruno Jean
Technician
Ventilation AéroTech inc.
Bonjour Bruno Aerotech, j'espère qu'on peut vous voir beaucoup fois sur cette site.
Salut
ça c'est tous qui reste depuis mon temps a l'école (+/- 30 ans passé) mais c'est la geste qui compte hein.
Hi guys.Since this is the new post forum,I'll just have a quick hello myself.Been on the site for a while and plenty of info and expertise to be found.
My brother and myself run a family business in Scotland...Springbok CARE...(Catering,Refrigeration & Air Conditioning Engineers).It's going well and work pretty much all over.Anyway...seasons greetings to all....
this is Khaled Hilaly i am pleased to send you my first massege hoping to be effective member in your forum
thank you very much
Hi everyone, new to the site, from ireland. found this site and only trying to find my way around it by trial and error, Went looking for commissioning sheets for air con general single splits and also coldrooms, if anyone can tell me if there out there to be found,
Khaled, Springbok and Nero, both welcome from the cold Belgium.
Hi all, Just to say "Hello". New to the site, looks very interesting. I am 57 ( still breathing, just ) been in the game for 36 years here in the UK. Covered most equipment in this time, not transport though. Started in the Domestic side right up to York Chillers. Playing with 410 at the moment and "dabbling" in ground source heat pumps.. Will be watching with interest. Cheers.