Eliwell Id series controllers.

Hi Guys and lasses.
I am being slightly lazy in that I have yet to search the Eliwell (Ivensys) website.
But I was running through the setup of one of these
controllers today.
When I noticed that you could upload and download
the controller setup, via a serial port on the controller!

Has anyone any experience of this?
And would they be willing to advise on were to obtain the necessary software / leads etc.
An opinion on as to how practical it would be to set up a database (on laptop).
Of these controllers on a site by site basis!
Cheers Grizzly

Slightly off topic but Dixell allow this using a "hot key", they're usually available from the wholesalers, allows coldrooms or cabinets with the same parameters to be uploaded very quickly, i have a feeling that the elliwell has to be networked to the pc for this, could be wrong though?

al

Its called Copy card and you can get all the info you need here: http://www.eliwell.it/home/

Al and Chemi.
Thanks for your input Guys appreciate it.
Because there was no initial input, last night.
I did search the afore mentioned website website.
Discovering that they do as you mention Chemi. The Copycard system which includes a USB version (see link below)
I intend to email for more details, unless someone has some more info on these?
Thanks once again guys!
Grizzly
http://www.eliwell.it/product.aspx?Id=369&LangType=2057